Specifications version A.3.
LOREM X
Whole Body PEMFT
​
The LOREM X BED Applicator is made of the best natural, nonmagnetic, nonelectrical material: Wood.
​
Mechanical Properties
Weight of LOREM X BED Applicator: 228 Kg
Weight Copper Coils of LOREM BED Applicator: 110 Kg
Dimensions LOREM X BED Applicator: L250 cm x H150 cm x W76 cm / 98.4" x 60" x 30 "
Weight of LOREM X DRIVER: 2.2 Kg
Dimension LOREM X DRIVER: W25 cm x H8.4 cm x D20.8 cm / W10" x H3.3" x D8.2"
Magnetical Properties
Specifications when LOREM X DRIVER is used with LOREM X BED applicator
The Lorem X Bed Applicator is a linear, passive inductive load to the Lorem X driver.
Total Inductance L = 400 mH
Total Electrical Resistance R = 1.65 Ohm
Magnetic Flux: variable 0 – 170 µT
Max dB/dt = 1.54 kT/s
Magnetic Coil Saturation Current: Magnetic saturation will not occur during regular use
Av Coil Diameter = 65 cm
Total amount of windings: 1550
Total length of windings: 3.200 m
Total amount of copper wire: 110 kg
​​​
Electrical Properties
MAINS
Voltage: 100-240V~
Frequency: 50-60Hz
Power: 515 VA (W)
Average Power use: 50W
Current: 4.5 A (110V)/ 2A (220V).
Fuse (double L + N) at Power Entry Module:
110-120V use: 8A
220-230V use: 4A
INPUT SIGNAL LOREM X DRIVER
Line in, 3.5mm jack, max 1.1V
Frequency range: 0.05 – 300 Hz
Duty Cycle: 1 – 15 %
OUTPUT LOREM X DRIVER
Voltage: 24V DC
Current: max 20 A​
​
PROTECTION & SAFETY
· Safety class I
· Low leakage current: < 5 µA.
· Insulation voltage I/P-O/P: 4kVAC
· Withstand Voltage: I/P-FG: 2kVAC
· Withstand Voltage: O/P-FG: 1.5kVAC
· Over-voltage: Shut down and repower to recover
· Overload: Hiccup mode, Automatic Recovery
· Over-temperature: Shut down, Automatic recovery after temperature goes down
· Short circuit: Continuous, Automatic Recovery
· Isolation Level: 2xMOPP, reinforced double I/O isolation system.
· Isolation Resistance: I/P-O/P, I/P-FG: >100 MOhms/500V/25C/70%RH
· Safety isolation is approved for an operating altitude of up to 4.000 m
· The earth leakage current is extremely low < 300 μA (246VAC)
· Touch current from mains to DC output < 100 μA (246VAC)​
​​
Intended Use
Induce an Electrical Field over every cell in the body using a Pulsed Electro Magnetic Field.
Effect:
The treatment will improve cell communication and functioning, bringing benefits.
Claims:
After treatment, persons might feel better:
-
More Relaxed
-
Lower Stress Levels
-
Better Mental Acuity
-
Better Sleeping
​The LOREM X is easy to use in a household or similar environment; no professional overseeing is necessary.
​
Environmental Data
Operating temperature10-50°C/50-122°F
Storage temperature: 5-70°C/41-158°F
Operating humidity: 30-60% RH
Storage humidity: 20-80% RH
Operating air pressure: 700 – 1060 hPa
Long-term Storage air pressure: 700 – 1060 hPa
Altitude max. during operation: 4.000 m
Vibration: IEC 60068-2-6 compliant
Mechanical Shock: IEC 60068-2-27 compliant
Environmental Compliance:
-
REACH Declaration​
-
​If you would like further information about the UK’s REACH Directive, please visit the following website, where links to Official Documentation on the REACH Directive can be found: https://www.hse.gov.uk/reach/about.htm
-
If you would like further information about the European Union’s REACH Directive, please visit the following website, where links to Official Documentation on the REACH Directive can be found: https://environment.ec.europa.eu/topics/chemicals/reach-regulation_en
-
-
RoHS Declaration
-
​If you would like further information about the UK’s Restriction on Hazardous Substances (RoHS) Directive, please visit the following website, where links to Official Documentation on the RoHS Directive can be found: https://www.gov.uk/guidance/rohs-compliance-and-guidance
-
If you would like further information about the European Union’s Restriction on Hazardous Substances (RoHS) Directive, please visit the following website, where links to Official Documentation on the RoHS Directive can be found: https://environment.ec.europa.eu/topics/waste-and-recycling/rohs-directive_en#overview
-
-
WEEE Declaration
​
​
Conformity & Regulatory
When you want to receive one of the following documents, Please do not hesitate to contact us:
-
Asbestos declaration
-
Code of conduct
-
DRC declaration
-
Dual use declaration
-
Embargo policy declaration
-
Environmental policy declaration
-
Electrostatic discharge declaration
-
Extended minerals declaration
-
Ozone-depleting substances declaration
-
PFAS, Per- and polyfluorinated alkyl substances, declaration
-
POP, Persistent organic pollutants, declaration
-
Quality & environmental interference declaration
-
Radioactive Substances declaration
-
REACH declaration
-
RoHS declaration
-
TSCA, Toxic Substances Control Act, declaration​
